Troubleshootmng - Troy-Bilt 020210 Manual Del Operador

TROUBLESHOOTmNG
Problem
Pump has foRowing problems:
failure to produce pressure,
erratic pressure, chattering, [oss
Of pressure, low water volume.
Detergent fails to mix with spray°
Engine shuts down during
operations
Cause
Low pressure spray tip installed.
2. VVater inHetis Mocked.
3. Inadequate water supply.
4. InHethose is kinHmdor leaking.
5. Clogged inlet hose strainer.
6. VVater supply is over 100°E
7. High pressure hose is blocked or
leaks.
8. Gun leaks.
9. Spray tip is obstructed.
0. Pump is faulty.
Detergent siphoning tube is not
submerged.
2. Chemical filter is clogged or
cradmd.
3. Dirty in=linefilter.
4. High pressure spray tip installed.
Out of gasoline.
2. Low oil level.
Correction
I. Rephce
spray tip with high
pressure spray tip.
2. Clear inlet.
3. Provide adequate water flow.
4.
Straighten inlet hose, patch leak.
S. Check and clean inlet hose
strainer.
6. Provide cooler water supply.
7. Clear blocks in outlet hose.
8. Replace gun.
9. Clean spray tip.
I0. Contact local service facility.
I. Insert detergent siphoning tube
into detergent.
2. Clean or replace fiker/detergent
3. See "Check In=Line Filter".
4. Replace spray tip with low
pressure spray tip.
[. Fi[[ fuel tan[<.
2. Fill crankcase to proper level.