User Manual - SBS TESPBTRAP2BTTWSK Manual De Instrucciones

UK

USER MANUAL

Switch on: with the earphones switched off, touch the MFB
button for about 3 seconds until the blue LED flashes and you
hear the message " power on ". The earphones also switch on
automatically when they are removed from the charging base.
Power off: touch the MFB button for about 5 seconds until the
red LED flashes and you hear the message " power off " The
earphones also switch off automatically when they are placed in
the charging base.
Charging the base: connect a charger to the micro USB socket on
the base. During charging, 4 blue LEDs will light up progressively
to indicate the percentage of charging.
Charging earphones: correctly insert the earphones into the
base and close the cover to activate charging. During charging a
red LED will light up on each earphone.
Pairing earphones to Bluetooth® on a smartphone: with
earphones off, touch both MFB buttons for about 5 seconds, until
the LEDs flash alternately red and blue and you hear the message
" pairing . " Activate Bluetooth® on the smartphone and look for
"SBS RAPTOR 2.0 " in the list of devices found. Selecting it will
complete pairing. Method 2: When removed from the charging
base, the earphones will automatically search for the last device
they were paired with.
NOTE: the earphones are already paired with each other, so they
will connect to each other automatically when extracted from
the charging base. At this point it is sufficient to pair them with
Bluetooth® on the phone.
MFB key functions:
Answering a call: touch MFB once quickly
Ending a call: touch MFB once quickly
Declining a call: touch and hold MFB for about 3 seconds
Recall the last number: touch the MFB key 3 times quickly
Play/pause music: during playback, press MFB key once quickly
Previous track : touch left MFB key quickly 2 times
Next track : touch right MFB key quickly 2 times
4