Tool Specifications; Operating Controls; Intended Use - Rubi TP-10 Manual De Instrucciones

Tool Specifications

Drill/Impact Drill
Type
Nom.power requirement
Rated rpm (no load)
1st speed
2nd speed
Pulse frequency
1st speed
2nd speed
Speed selection
Rotational direction selector
Speed selector switch
Safety clutch
Drill chuck clamping range
Drill chuck threads
Drill dia.
steel
wood
concrete
Clamping collar dia. [mm]
Weight
Safety class

Operating controls

1 Ring gear chuck
2 Auxiliary handle collar
3 Wing bolt
4 Rotational direction switch
5 ON/OFF switch
6 Locking button
7 Handle
8 Speed selector thumbwheel
9 Ventilation slots
10 Speed selector switch
11 Drill/Percussion drill switch
12 Screw
13 Auxiliary handle
14 Wing bolt
15 Depth gauge
ENGLISH
TP-10
1050 W
0 ... 970 rpm
0 ...1750 rpm
0 ... 12 800 rpm
0 ... 22 800 rpm
•
•
•
•
3 ... 16 mm
5/8" - 16 UN-2A
25 mm
45 mm
32 mm
57
3.2 kg
II /
16 Chuck key
17 Securing screw
18 Spanner surface
19 Flat open-end wrench
Not all of the accessories illustrated or described are
included as standard delivery.

Intended Use

TP-10:
The machine is intended for impact drilling in brick,
concrete and stone as well as for drilling in wood,
metal, ceramics and plastics. Machines with electronic
control and right/left rotation are also suitable for
screwing and thread-cutting.
The user alone is responsible for any liabilities caused
by usage other than intended.
GB
7