The appliance has been manufactured using high quality materials that can be reused
or recycled. Dispose of the appliance in a suitable waste collection centre.
Instructions for correct disposal of the product according to European Directive 2002/96/
EC and Italian Leg. Decree no. 151 of 25 July 2005. At the end of its useful life, the
product must not be disposed of with urban waste. It should be taken to a suitable
recycling centre set up by the local authorities or returned to a retailer who provides
this service.
Separate collection of an electrical appliance avoids a possible negative impact on the
environment and health arising from improper disposal and enables the materials it is
made of to be recovered so as to achieve signifi cant savings of energy and resources.
The crossed-out bin symbol applied on the product highlights the obligation to dispose
of electrical appliances separately. Improper disposal of the product by the user involves
the application of administrative penalties as provided for under current regulations.
The packaging is made from recyclable materials. Contact the competent authorities for
information regarding local regulations.
First use or after a long period of disuse
•
Fill the tank with fresh, still water (Fig. 4).
•
Make sure the lever is closed (Fig. 3).
•
Fit the milk dispenser fi rst and then the jug in its special place (Fig. 5).
•
Plug in the appliance and turn it on by pressing the button I.
•
Together with buttons A-B-C, indicator light G also blinks alternately RED.
•
Place a large container (at least 250 ml) under the coffee and milk dispensers.
•
Press one of the buttons A-B-C. Wait for the machine to complete the water circuit fi lling
cycle. The indicator G light goes off.
NB: If indicator light G continues to blink RED after the fi lling cycle, repeat the steps of
the previous point.
•
Buttons A-B-C-D-E-F will blink simultaneously; the machine is warming up.
•
When buttons A-B-C light up steady, do the rinse by pressing button C. Press the button
again to do another rinse.
•
Only remove the milk jug (Fig. 6).
•
Fill the milk jug with water.
•
Fit the milk jug in its special place (Fig. 5).
•
Make sure the milk jug knob is in the dispensing position (Fig. 10).
•
Place a large container (at least 250 ml) under the milk dispenser.
•
When buttons D-E-F light up steady, do the rinse by pressing button F. Press the button again
to do another rinse.
•
After this operation remove and rinse the used capsule drawer and milk jug (Fig. 6).
20
English
Instructions for use and disposal