General Information; Package Content; Installing The Kme Kit - Size 9, 10 And 10E - WEG KME 9 Guia De Instalacion

I. GENERAL INFORMATION
This guide offers information on how installing the KME Kit - Size 9, 10 and 10E. This
refers to a lifiting support which allows the assembly, on a removable way, of the CFW-09
inverter into the electrical panel. The inverter can be inserted and extracted as a sliding
drawer, making the installation and maintenance easier.
II. PACKAGE CONTENT
Position
1
2
3
4
5
6
7
8
9
10
11
12
NOTES!
- The tighten torque for the general purpose M6 screws shall be about 8.0 N.m. ± 15 %.
- The tighten torque for the general purpose M8 screws shall be about 19.0 N.m. ± 15 %.
- The tighten torque for the general purpose M10 screws shall be about 30 N.m. ± 15 %.

1. INSTALLING THE KME KIT - SIZE 9, 10 and 10E

Follow the steps below to correct installing the KME Kit:
Step 1 Secure the left support (8) and the right support (9) to the base guide for bearings
( 7/12
Step 2 Insert the two reinforcements to the corner guide (5) into the base guide for
bearings (
Step 3 Insert the left side guide (2) and the right side guide (3) into the base subset
already assembled;
Step 4 Secure the reinforcements to the corner guide (5) to the left side guide (2)
and to the right side guide (3) by using the M6x20 mm (6) screws;
Step 5 Secure the reinforcements to the corner guide (5) to the right support (9) and to
2
Installation Guide
KME Kit - Size 9, 10 and 10E
KME Kit - Size 9, 10 and 10E
Part Number
- Inverter
Left side guide subset
10094306
Right side guide subset
10094307
10094308 Lifting support subset
10053228 Reinforcement to the corner guide
Phillips flat head trilobular screw
10192651
Ball bearings guide subset – 1000 mm wide cabinet
10053236
Left support
10053238
Right support
10053239
10051025 M8 x 20 Hex cap screw with lock washer
M8 x 20 Flat head hex socket screw
10412583
Ball bearings guide subset – 800 mm wide cabinet
10053049
) by using the M8x20 mm (10) appropriate screws;
7/12 );
Description Quantity
1
1
1
1
2
8
1
1
1
4
20
1