Marking And Drilling The Glass Shelf Holes - MAAX BOSCA 6030 Guia De Instalacion

7
Final installation of side walls (cont'd)
STEP
Secure the walls to the wall studs with #8 x 1¾ "
screws (not included) in the previously drilled holes.
Also, secure the walls by the flanges on the sides of
the walls. Use the pre-dilled holes.
If needed, use shims to keep walls plumb, square
and leveled. (Cut shim excess)
IMPORTANT: HAND TIGHTEN ONLY. DO NOT
OVER-TIGHTEN THE SCREWS.

THE SIDE WALLS SHOULD LINE UP WITH
Quick tip
THE BATHTUB
8
Marking and drilling the
STEP
glass shelf holes
Place the template in the corner of the shower where
you want to install your shelf.
Slide the template up until the points on the left and
right-hand side of the template are at the height you
want your shelf.
Use a pencil, marker or wax pencil to mark the spots
where the holes for the shelf will be drilled.
Drill the holes using a 9/64" drill bit.
Drilling positions
? ?
Side wall
? ?
Fold here
7.4
Check me!
Bathtub
Check me!
90°
16