Silicone; Glass Shelf Installation - MAAX BOSCA 6030 Guia De Instalacion

9

Silicone

STEP
Apply a bead of silicone all along the wall to wall
and wall to base joints. For a smooth finish you can
remove the silicone excess with a damp rag or wet
finger.

Apply masking tape on both sides
Quick tip
of the joint where you will run a
bead of silicone. Apply the silicone,
smooth with a wet finger then
remove the masking tape.
10

Glass shelf installation

STEP
Apply silicone in the previously drilled holes on the side
and back walls. Apply silicone to the rear of the shelf
brackets (6).
Fasten the brackets in place using the screws (7).
When installing the faucet
faceplate or any other
component, be sure to
silicone the outer edge.
All faucets installed on the walls
must be sealed with silicone.
Remove protective film from walls
Check me!
10.1
Check me!
6
6
7
17