Muskoka MH35ABB Guía De Uso Y Cuidado página 7

Installation - Wall Mount (continued)
C
SECURING THE MOUNTING BRACKET
BB
Secure the mounting bracket (C) to the wall using four
large screws (BB).
HANGING THE ELECTRIC FIREBOX
Hang the electric firebox (A) on the hooks at the bottom of
the mounting bracket (C), and push the top of the electric
C
AA
firebox (A) into the mounting bracket (C).
Secure the electric firebox (A) to the mounting bracket (C)
by refitting the two small screws (AA) which were removed
in step 1.
A
INSERTING THE EMBER BED
Arrange the ember beds (acrylic crystals [D], pebbles [E]
or log set [F] ) along the inset window ledge at the front of D, E, or F
the electric firebox (A).
A
INSTALLING THE FRAME
NOTE: This front is heavy. It is recommended that you use
two people at this stage to prevent damage to the front or
B
the electric firebox.
Lift the frame (B) into place, making sure the 2 tabs on the
top back of the frame (B) fit securely into the holes on the
top of the electric firebox (A).
Secure the frame (B) by fastening two small screws (AA) on
both sides.
AA
A
7