Overview; Design And Function; Choosing The Correct Pneumatic Hammer For A Task; Main Parts - Atlas Copco TEX 05PE Instrucciones De Seguridad Y De Funcionamiento

Safety and operating instructions

Overview

To reduce the risk of serious injury or death to
yourself or others, read the Safety instructions
section found on the previous pages of this
manual before operating the machine.

Design and function

The TEX 05PE/09PE/12PE are machines with a
vibration damping machine body, designed for light
demolition and construction work. No other use is
permitted. The machines can be used both
horizontally and vertically.
Recomended insertion tools are listed in the spare
parts list.
Choosing the correct
pneumatic hammer for a task
It is important to choose the correct size of pneumatic
hammer for the work to be performed.
A pneumatic hammer that is too small means that
the work will take longer.
A hammer that is too big means that there must be
frequent repositioning, which is unnecessarily tiring
for the operator.
A simple rule for choosing the correct size of
pneumatic hammer is that a normal sized piece of
broken material should be removed from the
workpiece within 5–10 seconds operation.
● If it takes less than 5 seconds a smaller pneumatic
hammer should be selected.
If it takes more than 10 seconds a larger
●
pneumatic hammer should be selected.
14

Main parts

A
B
C
TEX 05PE
A
B
C
TEX 09PE, TEX 12PE
Handle
A.
B. Trigger
Tool retainer
C.
D. Air inlet
Silencer/Machine body
E.
Cylinder
F.
© 2014 Construction Tools PC AB | No. 9800 0812 90f | 2014-08-12
TEX 05PE, 09PE, 12PE
D
E
F
D
E
F
Original instructions