AKASO V50 Elite Touch Manual De Usuario página 9

7. Date & Time
Default setting is MM / DD / YY HH / MM / SS
8. Screen Saver: Off / 30 Sec / 1 Min / 2 Min
Default setting is 1 Min.
Turns off the display after a period of inactivity to save battery life. To turn on the display
again, press any button on the camera.
9. Auto Power Off: Off / 1 Min. / 2 Min.
Default setting is 2 Min.
Powers off your V50 Elite after a period of inactivity to save battery life.
10. Power-on Auto Record: On / Off
Default setting is Off.
If you turn on Power-on Auto Record, the camera records video automatically after you
turn on V50 Elite.
11. Power Frequency: 50Hz / 60Hz
Default setting is 50Hz.
12. White Balance: Auto / Daylight / Cloudy / Tungsten Light / White Fluorescent /
Underwater
Default setting is Auto.
White Balance lets you adjust the color temperature of videos and photos to optimize for
cool or warm lighting conditions. When you change this setting, the display immediately
shows you the effect on your image.
13. Exposure: -2.0 / -1.0 / +0.0 / +1.0 / +2.0
Default setting is +0.0.
By default, your camera uses the entire image to determine the appropriate exposure level.
However, Exposure lets you select an area that you want the camera to prioritize when
determining exposure. This setting is particularly useful in shots where an important region
might otherwise be over- or underexposed.
When you change this setting, the display immediately shows you the effect on your
image. If you change modes, the camera returns to using the entire scene to determine the
correct level of exposure.
13
14. Reset Wi-Fi Setting: Yes/ No
Default setting is No.
This option can erase the Wi-Fi data of V50 Elite.
15. Language: English, Português, 日本語, Deutsch, Italiano, Español, Français
Default setting is English.
16. Format Card: Yes / No
Default setting is No.
To keep your micro SD card in good condition, reformat it on a regular basis. Reformatting
erases all of your content, so be sure to offload your photos and videos first.
To reformat your card, please enter Camera Setting, then press Up or Down button to
scroll through the options to locate 'Format Card' option, press shutter button - Up button
- Shutter button.
17. System
Default Setting: Yes / No
System Info: V50 Elite: YYYYMMDD-V2
Card Info: Capacity / Free Space
Default Setting option resets all settings to their default values.
System Info option let you check the model, version and updated time of your V50 Elite.
Card Info option let you check the capacity and free space of your micro SD card.
Some functions cannot be used at the same time. Please refer to the information below.
4K / 60FPS, 2.7K / 60FPS, 1080P / 120FPS, 720P / 240FPS,
Image Stabilization
720P / 120FPS, 720P / 60FPS
Image Stabilization Slow Motion Movie
Image Stabilization
Angle: Middle, Narrow
/ Zoom
Image Stabilization Zoom
Image Stabilization Time Lapse Video
Image Stabilization Date Stamp
14