Nice Era Mat T Instrucciones Y Advertencias Para La Instalación Y El Uso página 5

Application types and operating requirements
Vertical roller awning Limit switch programming:
Functions available...
Arm awning Limit switch programming:
Functions available...
Stationary canopy Limit switch programming:
Functions available...
( )
"1"
"S"
Awning "alla romana" Limit switch programming:
Functions available...
Pergola awning Limit switch programming:
Functions available...
6
• with automatic stop in the upper limit
switch position "0" (with box)
• without containment mechanical con-
straints in the upper limit switch "0"
...in the presence of automatic hooks in the
lower limit switch "1"
...in the presence of manual hooks or bolts
in the lower limit switch "1"
...if it is necessary to reduce the impact
force when closing
• with automatic stop in the upper limit
switch position "0" (with box)
• without containment mechanical con-
straints (square bar or similar)
...to stretch the canvas: "FRT" function
...if it is necessary to reduce the impact
force when closing
• with automatic stop in the upper limit
switch position "0" (with box)
• without containment mechanical con-
straints for the limit switches
...in the presence of automatic hooks in the
lower limit switch "1"
...in the presence of manual hooks or bolts
in the lower limit switch "1"
...if it is necessary to reduce the impact
force when closing
• with automatic stop in the upper limit
switch position "0"
• without containment mechanical con-
straints for the limit switches
...in the presence of manual hooks or bolts
in the lower limit switch "1"
...if it is necessary to reduce the impact
force when closing
• with automatic stop in the two limit
switch positions: upper "0" and lower "1"
• with automatic stop in the lower limit
switch position "1"
• without containment mechanical con-
straints for the limit switches
...if it is necessary reduce the impact force
when closing
Recommended programming
Programming in semiautomatic mode (paragraph 5.7)
Programming in manual mode (paragraph 5.6)
Programming the "FTC" function (paragraph 5.15)
Programming the "FTA" function (paragraph 5.14)
Adjustment of the motor traction force ("RDC" function –
paragraph 5.12)
Programming in semiautomatic mode (paragraph 5.7)
Programming in manual mode (paragraph 5.6)
Programming the "FRT" function (paragraph 5.13)
Adjustment of the motor traction force ("RDC" function –
paragraph 5.12)
Programming in semiautomatic mode (paragraph 5.7)
Programming in manual mode (paragraph 5.6)
Programming the "FTC" function (paragraph 5.15)
Programming the "FTA" function (paragraph 5.14)
Adjustment of the motor traction force ("RDC" function –
paragraph 5.12)
Programming in semiautomatic mode (paragraph 5.7)
Programming in manual mode (paragraph 5.6)
Programming the "FTA" function (paragraph 5.14)
Adjustment of the motor traction force ("RDC" function –
paragraph 5.12)
Programming in automatic mode (paragraph 5.8)
Programming in semiautomatic mode (paragraph 5.7)
Programming in manual mode (paragraph 5.6)
Adjustment of the motor traction force ("RDC" function –
paragraph 5.12)
English – 4