Arcam FMJ UDP411 Manual De Instrucciones página 9

STANDBY/ON
This allows a powered-on UDP411 to be put into and
taken out of standby mode.
1 2 3
CLEAR 5
4 6
Press this key to clear data when entering numbers.
7 8 9
0
Transport (playback) controls CLEAR SRCH
These are standard playback buttons to play, stop,
pause, fast rewind, fast forward and skip tracks. See
the opposite page for details.
DISC MENU DISC MENU POP UP MENU
Activates the disc menu on a DVD.`
OK
Navigation buttons
Left, right, up and down buttons allow navigation
around the OSD and disc menus. Confirm a selection
RTN
by pressing .
OK
ZOOM VOL+
HOME
This key returns you to the 'Home' screen.
A-B RPT VOL-
STAT SUB AUDIO DISP
ZOOM, A–B and REPEAT
A B C D
The button enlarges a particular area of the
ZOOM
RES PIP AUDIO PIP ANGLE
picture. Each press of ZOOM cycles through the
enlargements available, usually up to 4x, although in
some cases no zooming is possible. You can use the
navigation buttons to move around within the image.
The button enables you to repeat a selected section
A–B
from the disc. A-B repeat is disabled on some BD
discs.
The button cycles through the repeat options
REPEAT
(repeat track, disc, etc.).
CR301
E-12
Playback and advanced
OPEN/CLOSE
controls
Opens and closes the disc tray
Number keys
Used for data entry. Also gives direct access to
individual tracks on audio CDs.
SEARCH
Displays a Search menu with Time, Title and Track
options.
POP UP MENU
Activates the 'pop up' menu on a BD.
RETURN
RED/GREEN/YELLOW/BLUE
When navigating a menu, press this key to return to
The colour-coded buttons
the previous screen or selection.
BLUE
some player functions that are displayed on-screen.
Their function depends on the disc and the part of the
disc being viewed.
VOLUME +/–, MUTE
adjusts the volume of an Arcam amplifier up
Vol +/–
RESOLUTION
or down.
Press the button once to mute an Arcam Cycles through the HDMI output resolutions (only
MUTE
amplifier. Press again (or use ) to un-mute. available from the Home screen).
Vol +/–
Advanced controls
These buttons are described on the following page.
1 2 3
4 5 6
Transport control buttons
7 8 9
Fast rewind; Fast forward
7 8
Skip track backwards, forwards.
9 :
0
Stop playback CLEAR SRCH
<
Start playback.
4
; Pause playback. Press 4 to resume
playback.
When paused, press 8 to activate slow
motion playback; pressing ; advances one
DISC MENU POP UP MENU
frame.
OK
STATUS SUBTITLE
This brings up the status screen: see 'Disc information' Cycles through the available subtitle languages,
on page E-14. When used with a data disc or USB including 'Off ' . Some discs force subtitles on,
RTN
device, displays relevant playback information. overriding any setup preferences.
STATUS
ZOOM VOL+
A-B RPT VOL-
, , and
RED GREEN YELLOW
provide interactive controls for Blu-ray Discs and
STAT SUB AUDIO DISP
A B C
RES PIP AUDIO PIP ANGLE
PIP AUDIO, PIP
The button turns the Picture-in-Picture Secondary Video function
PIP
ON and OFF, where available. PIP functionality is also known as Bonus
View. Note that only the primary video is played during a search or
CR301
frame-by-frame view.
selects secondary (PIP) audio. Secondary video and audio may
PIP AUDIO
not be present for every scene of a disc – the feature is disc-dependant.
E-13
5
4 6
7 8 9
0
CLEAR SRCH
DISC MENU POP UP MENU
OK
RTN
ZOOM VOL+
A-B RPT VOL-
AUDIO
STAT SUB AUDIO DISP
Some discs offer the facility to select different audio
tracks. Press to access a menu to select available
AUDIO
A B C tracks. See 'Soundtrack selection' on page E-14. D
RES
PIP AUDIO PIP ANGLE
DISPLAY
D
Cycles through the dimming states of the front panel.
ANGLE
Cycles through different camera angles, if present on
the disc.
CR301