Wall Mounting - GUTMANN Palma 10/1001 I/W Instrucciones De Uso

EN

Wall mounting

1. Determine positions for the following mounting holes using the dimensions given. Mis-
sing dimensions depend on the model and must be measured on the hood. Ensure
that there is a minimum distance between the hob and the lower edge of the cooker
hood.
2 holes (Ø6mm) for the suspension of the upper tower (tower support bracket).
2 holes (Ø10mm) for fixing the cooker hood (holding brackets). Optional
on model) 2
Please ensure that the cooker hood is positioned centrally in relation to the hob.
Optional mounting holes
depending on model
2. Drill holes and corresponding
Insert dowel flush.
3. Mount the tower retaining bracket for fixing the upper tower.
36
ASSEMBLY INSTRUCTIONS
holes (Ø8mm) for fixing the
Distance min.
(depending
hood body if
Dowel
Dowel
necessary.