Midi Implementation - KETRON GP 10A Manual De Instrucciones

Tables

MIDI Implementation

Only midi channel0/3/6/9/10/13/14/15 are recognized
M M I I D D I I M M E E S S S S A A G G E E H H E E X X C C O O D D E E
NOTE ON 9nH kk vv
NOTE OFF 8nH kk vv
PITCH BEND EnH bl bh
PROGRAM CHANGE CnH pp
CHANNEL AFTERTOUCH DnH vv
MIDI RESET FFH
CTRL 00 BnH 00H cc
CTRL 01 BnH 01H cc
CTRL 05 BnH 05H cc
CTRL 06 BnH 06H cc
CTRL 07 BnH 07H cc
CTRL 10 BnH 0AH cc
CTRL 11 BnH 0BH cc
CTRL 64 BnH 40H cc
CTRL 65 BnH 41H cc
CTRL 91 BnH 5BH vv
CTRL 93 BnH 5DH vv
CTRL 120 BnH 78H 00H
CTRL 121 BnH 79H 00H
CTRL 123 BnH 7BH 00H
CTRL 126 BnH 7EH 00H
CTRL 127 BnH 7FH 00H
CTRL CC1 BnH ccH vvH
CTRL CC2 BnH ccH vvH
RPN 0001H BnH 65H 00H 64H 01H 06H vv
RPN 0002H BnH 65H 00H 64H 02H 06H vv
NRPN 0108H BnH 63H 01H 62H 08H 06H vv
NRPN 0109H BnH 63H 01H 62H 09H 06H vv
NRPN 010AH BnN 63H 01H 62H 0AH 06H vv
NRPN 0120H Bnh 63H 01H 62H 20H 06H vv
NRPN 0121H BnH 63H 01H 62H 21H 06H vv
NRPN 0163H Bnh 63H 01H 62H 63H 06H vv
NRPN 0164H BnH 63H 01H 62H 64H 06H vv
NRPN 0166H BnH 63H 01H 62H 66H 06H vv
NRPN 18rrH BnH 63H 18H 62H rr 06H vv
NRPN 1ArrH BnH 63H 1AH 62H rr 06H vv
NRPN 1CrrH BnH 63H 1CH 62H rr 06H vv
NRPN 1DrrH BnH 63H 1DH 62H rr 06H vv
NRPN 1ErrH BnH 63H 1EH 62H rr 06H vv
NRPN 37xxH BnH 63H 37H 62H xx 06H vv
34
GP 10 - GP 10
A
D D E E S S C C R R I I P P T T I I O O N N
Midi channel n(0-15); note ON #kk(1-127), velocity vv(1-127).
vv=0 means NOTE OFF
Midi channel n(0-15) note OFF #kk(1-127), vv is don't care. Pitch
bend as specified by bh|bl (14 bits) Maximum swing is +/- 1
tone (power-up). Can be changed using "pitch bend sensitivity".
Center position is 00H 40H.
0 to15: Voice 0 to 15
16 to 31: Program (patch) 0 to 15
vv pressure value. Effect set using Sys. Ex. 40H 2nH 20H-26H
Reset to power-up condition
Not recognized
Modulation wheel. Rate and maximum depth can be set
using SYSEX
Portamento time.
Data entry : provides data to RPN and NRPN
Volume (default=100)
Pan (default=64 center)
Expression (default=127)
Sustain (damper) pedal
Portamento ON/OFF
Reverb send level vv=00H to 7FH
Chorus send level vv=00H to 7FH
All sound off (abrupt stop of sound on channel n)
Reset all controllers
All notes off
Mono on
Poly on (default power-up)
Assignable Controller 1. cc=Controller number (0-5Fh),
vv=Control value (0-7Fh). Control number (ccH) can be set on
CC1 CONTROLLER NUMBER (Sys. Ex 40 1x 1F). The resulting effect is
determined by CC1 controller function (Sys.Ex. 40 2x 40-4A)
Assignable Controller 2. cc=Controller number (00h-5Fh),
vv=control value (0-7Fh). Control number can be set on
CC2 CONTROLLER NUMBER (Sys.Ex. 40 1x 20).
The resulting effect is determined by CC2
controller function (Sys.Ex.40 2x 50-5A).
Fine tuning in cents (vv=00 -100, vv=40H 0, vv=7FH +100
Coarse tuning in half-tones (vv=00 -64, vv=40H 0, vv=7FH +64
Vibrate rate modify (vv=40H -> no modif)
Vibrate depth modify (vv=40H -> no modif)
Vibrate delay modify (vv=40H -> no modif)
TVF cutoff freq modify(vv=40H -> no modif)
TVF resonance modify (vv=40H -> no modif)
Env. attack time modify(vv=40H ->no modif)
Env. decay time modify(vv=40H -> no modif)
Env. release time modif(vv=40H ->no modif)
Pitch coarse of drum instr. note rr in semitones
(vv=40H -> no modif)
Level of drum instrument note rr (vv=00 to 7FH)
Pan of drum instrument note rr (40H = middle)
Reverb send level of drum instrument note rr (vv=00 to 7FH)
Chorus send level of drum instrument note rr
(vv=00 to 7FH)
Special Synthesis features controls (see §1-4- above)
C C O O M M P P A A T T I I B B I I L L I I T T Y Y
MIDI
MIDI
GM
GM/GS
MIDI
GS/DREAM
MIDI
MIDI
MIDI
MIDI
MIDI
MIDI/GM
MIDI
MIDI
GS
GS
MIDI
MIDI
MIDI
MIDI
MIDI
GS
MIDI
MIDI
GS
GS
GS
GS
GS
GS
GS
GS
GS
GS
GS
GS
GS
DREAM