Important Safety Instructions - Premier MCO-5424 Manual De Instrucciones

IMPORTANT SAFETY INSTRUCTIONS

When using the sewing machine, basic safety precautions should always be followed, including the
following:
" Read all instruction before using."
DANGER
- The sewing machine should never be left unattended when plugged in. Always unplug this sewing
machine from the electrical outlet immediately after using and before cleaning.
- Always unplug before changing the light bulb. Replace bulb with same type rated 15watts.
WARNING
- Do not allow this machine to be used as a toy. Close attention is necessary when the sewing
machine is used by or near children.
- Use the sewing machine only for its intended use as described in this manual.
- Use only accessories recommended by the manufacturer as contained in this manual.
- Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it
has been dropped or damaged, or dropped into water. Return the sewing machine to the nearest
authorized dealer or service center for examination, repair, electrical or mechanical adjustment.
- Never operate the sewing machine with any of the air openings blocked. Keep the ventilation
openings of the sewing machine and foot controller free from the accumulation of lint, dust and loose
cloth.
Never drop or insert any object into any openings.
-
- Do not use this machine outdoors.
- Do not operate this machine where aerosol (spray) products are being used or where oxygen is
being administered.
- To disconnect, turn the main switch to the symbol "O" position which represents off, then remove
plug from outlet.
- Do not unplug by pulling on the cord. To unplug, grasp the plug and pull, not the cord.
- Keep fingers away from all moving parts. Special care is required around the sewing machine
needle.
Always use the proper needle plate. The wrong plate can cause the needle to break.
-
Do not use a bent needle.
-
- Don not pull or push the fabric while stitching. It may deflect the needle causing it to break.
- Cut off the power position when making and adjustments in the needle area. Such as threading the
needle, changing the needle, threading the bobbin, or changing the presser foot.
Always unplug the sewing machine from the electrical outlet when removing covers, lubrication, or
-
when making any other user service adjustments mentioned in this instruction manual.
"SAVE THESE INSTRUCTION"
"This sewing machine is intended for household use."
P-2
– To reduce the risk of electric shock:
– To reduce the risk of burns, fire, electric shock, or injury to persons: