Wind The Bobbin - Premier MCO-5424 Manual De Instrucciones

Winding
(1) Draw thread from the spool through the bobbin winder tension disc.
(2) Pull thread through the hole in the bobbin and insert the bobbin into
the bobbin shaft.
(3) Turn the bobbin to the right.
(4) Hold the end of the thread and keep stepping down the foot controller.
Stop the after several turns. Cut the excess thread close to the bobbin.
(5) Step down again the foot controller. Wind thread until the bobbin is full
and stop the machine. Push the shaft to the left and cut the thread.
Instruction: The bobbin shaft is to be pushed to the left when the winding
finished.
P-14