Machine Threading - Premier MCO-5424 Manual De Instrucciones

P-16

Machine threading

Turning forward the balance wheel and move thread take-up
lever to the highest position.
Raise presser foot, and insert the spool into spool holder as
shown in the illustration.
Draw thread from the back side of the spool.
(1) Wind thread past thread retainer by both hands.
(2) Hold the thread and pull it into the thread tension disc
and then past the thread plate.
(3) Pull up the thread tightly and let it through the slit of
thread take-up lever from the right side.
(4) Pull down thread and let it go through the catch the
thread hook.
(5) Pull thread through needle hole from the front to the
back.
Change the paire of needle (change as the one needle) before
sewing, and insert respectively one spool into the two spool
holder, then complete the action of threading as the move of (1)
- (5).
Note:Only agree with the type of two-needle stitch.