Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
(1)
Make the marks of buttonhole carefully on the material.
(2)
Pull forward slide (A), keep the mark (C) on it in conformity to
the initial mark (B). The mark on the presser foot should be aligned with
that of the material... Lower the presser foot.
Instruction: Marks on the slide should be carved in cm.
(3)
Adjust stitch selection dial to
come to the marks in front of the buttons and then stop sewing with
needle pausing at lower right.
(4)
Adjust stitch selection dial to . Make 4-6 stitches before
stopping sewing with needle pausing at lower left.
(5)
Adjust stitch selection dial to
come to the marks at the back of buttons and then stop sewing with
needle pausing at top left.
(6)
Adjust stitch selection dial to
stopping sewing with needle pausing at top right.
(7)
After sewing buttonholes, take out fabrics. Insert a pin at the
back hole of buttonhole so that the end of thread of buttonhole will not
be cut off mistakely. Cut out the buttonhole carefully with a buttonhole
cutter.
. Keep stitching forward until
. Keep stitching backward until
. Make 4-6 stitches before
P-31
Publicidad
Tabla de contenido
