Blind Hem - Premier MCO-5424 Manual De Instrucciones

Blind hemming
(1) Pattern selection dial: D oder E
(2) Stitch length: 1.5-4
(3) Stitch width: 3-5
(4) Presser foot: Zigzag
The stitch is suitable for sewing dege of ponts, skirt and table cloth etc which needle fold hem. See fig.1
Fold hem back triple folded edge extend about 4.5cm to the edge of fabric and folded edge. Trun
balance wheel and make needle move till the leftest position.
Needle point stays on the left of folded mark it is exactly to bring needle into then start.
Unfold the fabric and you will have a blind stitch hem.
P-34