Loading; Decommissioning And Recommissioning - AHT ATHEN Serie Manual De Instrucciones

AHT Cooling Systems GmbH
►Avoid transmission of pulsations and vibrations to
the device.
►Avoid external force to the device such as
careless movements with floor trucks or floor
cleaning machines.
Property damage from foreseeable misuse.
•
►Do not operate the device above the climate class
indicated on the power rating plate or on the
additional stickers (see → Chapter 2.2.1).
►The ambient temperature must not be less than
16°C (60.8°F).
►Operate the device only with a glass cover.
►Check the temperature (see → Chapter 4.1).
►Stored goods must be checked by the operator in
the case of power failure (temperature control).
►Check regularly for foreign objects in the goods
area. Incorrectly stored goods must be removed
immediately.
►Remove food residues, such as spilled liquids,
and packaging waste (see → Chapter 10.1).
►Regularly check that the glass cover is closed.
In the case of special climate conditions with high
atmospheric humidity, condensation formation
(condensation water) can occur in the interior of the
device. This condensation must be removed for
hygiene reasons.
WARNING
For devices of type R-290: Drying of
condensation water by rubbing. Electrostatic
discharge and spark formation. Sparks can
ignite the leaking refrigerant when the
refrigerant circuit is damaged/not sealed.
Risk of fire.
►To remove condensation, use a damp cloth
or sponge.
►Do not use dry cloths or sponges for
rubbing dry.

Loading

Access to the goods is from above.
The device must only be loaded with goods when the
temperature specified for the product has been
reached. Temperature display (see → Chapter 4.1).
Loading is only permitted up to the stacking mark
indicated on the inside (see → Fig. 12).
The following applies for device series (U):
Upper stacking mark for deep-freezing "-"
and cooling "+".
Lower stacking mark for meat cooling "S".
Fig. 12: Stacking mark
NOTE
Property damage from foreseeable misuse on
•
devices with (AD) function.
►Carry out loading between 06:00 and 20:00.
on18.05.2018 11:08
361929_0917_BA_SM_V4_06.09.2017_U_enUS_DRUCK.docx
CAUTION
Cutting injuries in the case of material
breakage.
►Do not climb onto or into the device
during loading.
CAUTION
Falling objects.
Impact injury. Cutting injury in the case of
glass breakage.
►Do not place objects on the device.
CAUTION
Opening/closing the glass cover. Hands
(parts of your body) can be jammed.
►During opening/closing, do not reach
into the opening gap.
►When opening/closing, pay attention to
other people.
CAUTION
Low temperature. Frostbite on the skin.
►Wear protective gloves when
loading.
NOTE
• Property damage from foreseeable misuse.
►The device must only be loaded with goods when
the temperature specified for the product has been
reached.
►Insert the goods carefully.
►Close the glass cover immediately after loading.
Decommissioning and
recommissioning
WARNING
Work on the electrical system.
Contact with live parts may cause electric
shock.
►Work on the electrical system may only
be performed by qualified staff.
►Observe the electrical safety rules
before starting work.
1. Disconnect the device.
2. Secure the device against restarting.
Reasons for decommissioning
by qualified staff
Maintenance, service, repair (see → Chapter 10.3)
by operating staff
Damage to the device (e.g. broken glass cover).
Page 50