Loading; Shutdown And Restart; Shutdown; Restart - AHT RIO Serie Manual De Instrucciones

en | AHT Cooling Systems GmbH

11.1 Loading

CAUTION
Material breakage.
Falling hazard. Cuts.
▪ When loading, do not climb onto or into
the appliance.
Falling objects.
Impact injuries.
▪ Do not set down any objects on the ap-
pliance.
Opening / closing the lid.
Hands (body parts) may be trapped.
▪ When opening / closing, do not reach
into the opening gap.
▪ Look out for other persons when open-
ing/closing the lid.
Low temperature.
Frostbite to skin.
▪ Wear protective gloves when loading.
NOTE
Property damage due to misuse.
▪ Only add goods to the appliance once the specified
temperature for the product has been reached.
▪ Adhere to loading specifications.
▪ Carefully add goods.
▪ Open the lid only temporary for loading and remov-
ing the goods.
▪ Close the lid immediately after loading.
The goods are accessed by opening the lid from
above.
Temperature display (see →Temperature display).
Loading specification
The stacking limit is marked by stacking markers in
the appliance.
–
Loading is only permitted up to the stacking mark
made on the inside.
Fig. 5.: Stacking mark
405862_1_0819

11.2 Shutdown and restart

WARNING
Work on the electrical system.
Contact with live parts may result in
electric shock.
▪ Only qualified staff may carry out work on
the electrical system.
▪ Observe the electrical safety rules prior to
commencing work.
Disconnect the appliance.
Secure the appliance against reconnection.
Reasons for shutdown
Reasons for shutdown by qualified staff
– Maintenance, service, repair (see →Maintenance,
service, and repairs)
Reasons for shutdown by operating personnel
–
Damage to appliance.
- e.g. broken lid

11.2.1 Shutdown

Only trained operating personnel or qualified staff
may shut down the appliance.
WARNING
Shutdown of the appliance.
Contact with live parts may result in electric
shock.
▪ Only trained operating personnel may dis-
connect the appliance.
▪ Disconnect the appliance and secure it
against reconnection.
Steps for shutdown by operating person-
nel
1. Move the goods to another appliance with the
same product temperature class.
2. Switch off the appliance circuit by removing the
mains plug and secure against reconnection (see
→Electrical connection).
Longer shutdown:
–
Carry out the steps for shutdown.
–
Bring the appliance to room temperature.
– Carry out basic cleaning (see →Basic cleaning).
–
Leave the lid open.
NOTE
Material damage during prolonged shutdown.
▪ Do not expose the appliance to heat radiation.
▪ Do not place anything in or on the appliance.
▪ Store the appliance in a stable operating position
(horizontal alignment).

11.2.2 Restart

For restarting, see →Start-up.
Operation | 11
35 / 436