Publicidad
Idiomas disponibles
Idiomas disponibles
3
Inspection-Description of the machine
• On receiving the machine check its condition.
• Always keep it perfectly clean.
• Check the supply cable lead periodically.
• Always keep alert when working.
• Check the mounting of the components (abnor-
mal vibration).
SEE FIG. 1
1
Chassis-tank
2
Leg
3
Head clamping handle
4
Water pump
5
Lifting lever
6
Locking handle
7
Loading leg
8
Drain plug
9
Motor
10
Lack of voltage switch
11
Hood
12
Disc casing
13
Housing cover
14
Movable table
15
Table stop
16
Movable table stop
17
Manufacturer's plate
18
Cutting guide
19
Table locking
20
Carrying handles
21
Transport wheels
Water tank
22
23
Water level
4
Handling - transport
Dismantle your machine into two parts.
TABLE PART (SEE FIG 3)
• Remove the table by tilting it slightly so as to
clear the rear retainer pins
BLOCKING TABLE FOR TRANSPORTATION
(SEE FIG 4)
FOLDING THE FEET (SEE FIG 5)
TRANSPORT (SEE FIG 6)
LOADING (SEE FIG 7)
PLACING ON FEET (SEE FIG 8)
5
Inspection before starting
Please read the instructions for use
prior to operating the machine for the
first time.
The use of ear protection is mandatory.
The operator must wear pro-
tective clothing appropriate
to the work he is doing. We
recommend
includes both eye and ear
protection.
The working area must be completely
cleared, well lit and all safety hazards
removed (no water or dangerous
objects in the vicinity).
Any persons not involved in the work
should leave the working area.
Use blades suitable for the work to be
T
done (speed, geometry, application,
etc.).
that
this
21
Publicidad
