MZ electronic NAUTI 030 Instrucciones De Uso página 22

Setting up to count in metres
1
Press the button
seconds. The display will show the
following message for 5 seconds.
1a
If the
within 5 seconds, the speed
reduction function will be enabled
for the last 2 metres (or 6 feet) of
chain.
The display will show YES.
If the
function will be stored.
2
The
(CIRCUMFERENCE)
across the display screen for 2
seconds;
then:
3
Press
number on the
reaching the value corresponding
to the length of chain on the gipsy
(e.g. 28 cm).
Press
value by one unit.
NAUTI 030
for 5
button is pressed again
button is not pressed within 5 seconds, the last 2 metres stop
word
will
to increase the
display
to decrease the set
CIR
run
until
22
English
Rev. 05 – 2007