MZ electronic NAUTI 030 Instrucciones De Uso página 25

Use
Press the
(it will be switched off 2.5 after the last control has been operated).
Press button
If the automatic speed reduction is set (see point 1a "Setting up to count in
metres") the function will be activated for last 2 metres or 6 feet till the complete
going up of the anchor.
If the stop function is set, at the last 2 metres or 6 feet, windlass stop. To
complete the going up of the anchor, push another time
Press button
When any button is released (UP or DOWN) the corresponding action is
stopped.
A 1 second interlock is present between UP and DOWN commands.
If no command (UP or DOWN) is given within 2 minutes, the two buttons are
automatically inhibited.
NAUTI 030
button to activate controls and to switch on the display lighting
(UP) to control the anchor going up.
(DOWN) to control the anchor going down.
25
English
(UP) button.
Rev. 05 – 2007