Ryobi PBT01B Manual Del Operador página 10

FEATURES
MITER SCALE
TRIGGER
The miter scale can be set from 0° to 47° (both left and right)
LOCKOUT LEVER
to achieve a wide variety of cuts.
PARTIAL SLIDING FENCE
SWITCH
TRIGGER
The partial sliding fence on your compound miter saw has
been provided to help secure the workpiece when making
straight cuts.
The sliding feature makes it easy to adjust the position of the
partial fence. Loosen the fence screw before attempting to
slide the partial fence. Once the desired position is determined,
PADLOCK
tighten the fence screw to secure.
HOLE
POSITIVE STOPS ON MITER TABLE
Positive stops have been provided at 0°, 15°, 22.5°, 31.6°, and
45° on both the left and right side of the miter table.
SPINDLE
NOTE: To bypass the positive stops, squeeze the detent release
LOCK BUTTON
lever and lift the detent override. To release the override, squeeze
the detent release lever.
SELF-RETRACTING LOWER BLADE GUARD
The lower blade guard is made of shock-resistant, see-through
plastic that provides protection from each side of the blade. It
retracts over the upper blade guard as the saw is lowered into
the workpiece.
SWITCH
TRIGGER
SLIDE BARS
PADLOCK
When unlocked, the saw arm will glide forward and backward
the length of the slide bars for cutting various workpiece widths.
SLIDE LOCK KNOB
The slide lock knob locks and unlocks the sliding feature of
this tool.
SPINDLE LOCK BUTTON
See Figure 4.
The spindle lock button locks the spindle and stops the blade
from rotating. Depress and hold the lock button while installing,
changing, or removing blade.
SWITCH TRIGGER
See Figure 4.
The saw will not start until you depress the trigger lockout
lever and squeeze the switch trigger. To prevent unauthorized
Fig. 4
use of the compound miter saw, disconnect it from the power
supply and lock the switch in the off position. To lock the switch,
install a padlock (not included) through the hole in the switch
trigger and make certain the switch is inoperable. If the switch
is still operable with the padlock installed, a padlock with a
larger shackle diameter must be used. Store the padlock key
in another location.
10 − English