Publicidad
ENGLISH
SL175U Series
360˚ SMD LED Portable Work Light
OWNERS MANUAL
1. IMPORTANT SAFETY INSTRUCTIONS
1.1 SAVE THESE INSTRUCTIONS –
This manual contains important safety
and operating instructions.
1.2 Read, understand and follow all
instructions, cautions and warnings
listed in this manual. Failure to follow all
instructions and abide by all cautions and
warnings could result in personal injury,
injury to others and property damage.
1.3 IMPORTANT! CHARGE WORK LIGHT
IMMEDIATELY AFTER PURCHASE,
AFTER EACH USE, AND AT LEAST
EVERY 6 MONTHS.
1.4 DO NOT turn on the work light while it is
being charged.
1.5 DO NOT handle or move the work light
while it is being charged.
1.6 DO NOT look directly into the light or
shine the light directly into the eyes of any
person or animal.
1.7 DO NOT allow children to use the
work light.
1.8 DO NOT operate the work light if it has
received a sharp blow, been dropped, or
otherwise damaged in any way; take it to
a qualified service person.
2. PERSONAL SAFETY PRECAUTIONS
WARNING! TO REDUCE THE RISK OF
BURNS OR FIRE, FOLLOW THESE
SAFETY PRECAUTIONS:
2.1 DO NOT disassemble the work light;
take it to a qualified service person when
service or repair is required. Incorrect
reassembly may result in a risk of fire.
2.2 DO NOT crush, puncture, short external
contacts or dispose of in fire or water.
2.3 DO NOT expose to temperatures above
140°F (60°C).
2.4 Recycle or dispose of the used battery as
required by local regulations.
2.5 If the electrolyte in the cells gets on
your skin, wash thoroughly with soap
3. SET UP INSTRUCTIONS
3.1 Remove any cord wraps and uncoil the cable between the charger and the work light.
SAVE THESE INSTRUCTIONS.
• 2 •
1.9 DO NOT leave the battery in a discharged
state.
1.10 WARNING! Do not use any other charger
except the one provided to charge the
internal battery. Use of a charger not
supplied by the manufacturer may result
in a risk of fire, injury to persons and/or
damage to property.
1.11 DO NOT use the work light with a charger
which has a damaged cord or plug,
replace the cord or plug immediately.
1.12 IMPORTANT! Make sure the voltage
marked on the charger plug is the same
as the work light.
1.13 To reduce the risk of damage to the
charger plug, pull by the plug, rather than
the cord when disconnecting the charger.
1.14 DO NOT use the provided charger to
charge or power any other electrical item.
1.15 DO NOT immerse the work light in water.
1.16 AC CHARGER FOR INDOOR USE ONLY.
DO NOT expose the AC charger to water
or use in damp conditions.
1.17 Ensure the work light is unplugged and
allowed to cool before attempting any
cleaning or replacement.
and water. If it gets into your eyes, rinse
thoroughly with cool water and seek
immediate medical attention.
2.6 This product contains a lithium ion
battery. In case of fire, you may use
water, a foam extinguisher, Halon,
CO
, ABC dry chemical, powdered
2
graphite, copper powder or soda (sodium
carbonate) to extinguish the fire. Once
the fire is extinguished, douse the
product with water, an aqueous-based
extinguishing agent, or other nonalcoholic
liquids to cool the product and prevent the
battery from re-igniting. NEVER attempt
to pick up or move a hot, smoking, or
burning product, as you may be injured.
Original instructions
Publicidad
