Troubleshooting - EarthWise LB20020 Manual Del Operador

HANDLE
BATTERY
Problem
- Unit does not run
- Battery will not charge
PRODUCT SPECIFICATIONS
Input. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 V / 1.5Ah, DC only
Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 MPH
Tube Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 In.
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 LBS
- One Speed Switch - On/Off - Snap on tube - Rubber Over-Molded Handle
ON/OFF SWITCH

TROUBLESHOOTING

Possible Cause
- Battery not making contact
- Battery not installed properly
- Battery not charged
- Battery not inserted into charger
- Charger not plugged in
- Surrounding air temperature too hot or too cold
FEATURES
LB20020
REAR BLOWER TUBE
- Check battery is fully inserted
- Check that battery is securely connected to the blower
- Check battery charging requirements
- Insert battery into charger until red LED appears
- Plug charger into a working outlet
- Check current at receptacle by plugging in a lamp or other appliance
- Check to see if receptacle is connected to a light switch which turns
power off when you turn out the lights
- Move charger and tool to a surrounding air temperature of above 32
degree F (0 degree C) or below 100 degree F ( +37.8 degree C)
5
FRONT BLOWER TUBE
Possible Solution