Door Installation; Door Position Adjustment - Conglom QL014K Manual Del Usuario

Installation (continued)

DOOR INSTALLATION

CAUTION:
Do not rest or bump the leveling feet on the
side as this may cause them to detach or break .
- Rotate the cabinet right side up and install the doors . The
hinges installed in the doors are desinged to hook and
click into the hinge plates installed in the side panels of the
cabinet .
- You will hear a click sound when the hinges are properly
engaged in the hinge plates .
- Insert the door handle screws (H) into the pre-drilled holes
on each door .
- Attach the door handles (G) and tighten the door handle
screws (H).
- Peel and stick rubber door bumpers (M) to the inner
corners of the doors (optional).

DOOR POSITION ADJUSTMENT

- If the doors need to be repositioned, the hinges can be adjusted to ensure a precise fit with the cabinet.
- The lateral adjustment screw adjusts
the door left or right .
G
- The horizontal adjustment screw
adjusts the door forward or backward .
Fig . 8
9
Please contact cs@conglomkb .com or 1-877-333-0098 for further assistance .
Click
Hook
2
1
Fig . 6
H
Fig . 7
- The vertical adjustment screw adjusts
the door up or down .
CONGLOMKB .COM