Haier HWS84GA Manual Del Usuario página 23

Use
Notice
Influences on temperatures
The temperature inside the appliance is influenced by the following factors:
▶ Ambient temperature
▶ Frequency of door opening
The default setting is 12°C
When display stops flashing, it goes back to showing the current temperature
inside the wine cellar. It will take some time to reach the set temperature.
9. Lighting mode setting
Press the
up gradually. When pressed the
10. °C/°F function
Press the
11. Power-Off Memory function
If a power outage, the cellar will automatically save the set temperature. After
power recovery, it will run based on the temperature set before the power outage .
12. Low temperature compensation function (except HWS49GAE)
The wine cellar has a low temperature compensation function to ensure the stability of
the temperature: When the ambient temperature is lower than the set temperature, the
wine cellar automatically starts the low temperature compensation function, heating the
application.When the temperature in the application reaches the set temperature, the
low temperature compensation function is automatically turned off.
13. Door opening alarm
If the door is kept open for over 1 min, buzzer will be beeping to give an alarm
till the door is closed or any key on display panel can be operated and then the
buzzer will stop beeping.
20
button. When the lights in the cabinet are on, the lights will be lighted
button, switch between Fahrenheit and Celsius.
▶ Amount of stored bottles
▶ The location of the appliance
button once again the lights will be off gradually.
EN