Speed Adjustment; Tool Operation; Model Identification - Bostitch TU-216 Serie Manual De Operación Y De Mantenimiento

EYE PROTECTION which conforms to ANSI specifications and provides
protection against flying particles both from the FRONT and SIDE should
ALWAYS be worn by the operator and others in the work area when loading,
operating or servicing this tool. Eye protection is required to guard against
flying fasteners and debris, which could cause severe eye injury.
The employer and/or user must ensure that proper eye protection is worn. Eye
protection equipment must conform to the requirements of the American National Standards
Institute, ANSI Z87.1-1989 and provide both frontal and side protection. NOTE: Non-side
shielded spectacles and face shields alone do not provide adequate protection.
BEFORE HANDLING OR OPERATING THIS TOOL:
I. READ AND UNDERSTAND THE WARNINGS CONTAINED IN THIS MANUAL.
II. REFER TO "TOOL SPECIFICATIONS" IN THIS MANUAL TO
IDENTIFY THE OPERATING SYSTEM ON YOUR TOOL.
BOSTITCH offers two types of Operation for the TU-216 series tools.
Refer to Tool Operation Check on page 9 before proceeding to use this tool.
Automatic:
Identified by

Speed Adjustment

Trigger Free Play Adjustment
Speed Adjustment
Trigger Operated:
Identified by
No Speed Adjustment
No Trigger Free Play Adjustment
Trigger Free Play Adjustment
-7-

TOOL OPERATION

MODEL IDENTIFICATION