Be sure to empty the dust cup and clean the dirt filter after each use to keep vacuum cleaner operating
efficiently. The inlet filter must be securely attached before using. Failure to replace the inlet filter will allow dirt
to enter motor section which will damage the vacuum cleaner.
Emptying the Dirt Cup
1
Push button up and pull out dirt cup
Align and push dirt filter into top of dirt cup.
3
Be sure dirt filter is inside cup and seated
on the ribs
The Dirt Filter / The Exhaust Filter
Clean filters after each use. If filters need further
cleaning, launder them in warm water using a mild
detergent.
Air dry thoroughly before replacing filters into cleaner. if
filters are damaged or extremely soiled replace them.
The Inlet Filter
The inlet filter removes dust and dirt from the air that
circulates in the vacuum. The inlet filter is not reusable,
and should be checked once a year for replacement.
M a i n t e n a n c e
Dirt Filter
Dirt Cup
Button
2
Remove dirt filter from dirt cup and empty contents
4
Slide the top of dirt cup into place and press the dirt
cup downward.
Push button up and lock dirt cup into place
Dirt Filter
1-3
EN
1
Pull open the filter compartment.
Peel the filter off of
2
the grid.
Inlet Filter