Door Position Adjustment; Installing The Faucet - Conglom QL100 Manual Del Usuario

Installation (continued)

DOOR POSITION ADJUSTMENT

If the doors need to be repositioned, the hinges can be adjusted to
ensure a precise fit with the cabinet.
1 . The lateral adjustment screw adjusts the door orientation
from left to right .
2 . The horizontal adjustment screw adjusts the door
orientation from front to back .
3 . The vertical adjustment screw adjusts the orientation
up or down .

INSTALLING THE FAUCET

Before installing, carefully unpack the faucet and ensure no parts
are missing .
- Insert the faucet shank, hose end and outlet through the
holes of the base plate and sink .
- From underneath, slide the rubber gasket and faucet shank
nut over the end of the faucet shank, then tighten the
faucet shank by hand until it is snug .
- Connect the hose end to the outlet . Then install the weight
onto the hose such that the spray head retracts back into
the faucet neck with ease .
- Connect the water supply lines (not supplied) to the faucet
shanks .
Faucet shank
Base plate
Rubber gasket
Faucet shank nut
Weight
7
Please contact cs@conglomkb.com or 1-877-333-0098 for further assistance .
1
3
Faucet head
Outlet
Sink
CONGLOMKB .COM
2
Hose end