Ballistic Output Formats; Important - Leica RANGEMASTER 2000-B Manual De Instrucciones

BALLISTIC OUTPUT FORMATS (

The advanced ballistic compensation (
Rangemaster 2000-B allows you to display one of the follow-
ing three ballistic values after the measured range if required:
- the equivalent horizontal range (
- the corresponding holdover (
- the number of clicks required on the rapid reticle adjust-
ment (MOA/clicks)
To include both the displayed holdover and the displayed
value:
EHr
a. the measured range to the target
b. the angle of inclination of the weapon
c. the set ballistic curve
d. the measured temperature and atmospheric pressure val-
ues
e. the set zeroing range
)
TM
ABC
) on the Leica
AbC
)
EHr
)
HOLd
Notes:
• Calculation of the specified values is based on the cur-
rently set ballistic curve, i.e. the curve must be selected
first (see p. 34).
• For safety reasons, ballistic output values are only speci-
fied up to a range of 800m/875yds. The actual measured
range is also specified.

Important:

• Please note that particularly at long ranges, the influ-
ence of all relevant ballistic influencing factors is greatly
increased and considerable variations can occur. The bal-
listic values displayed should therefore only be viewed as
a guideline.
• Regardless of whether this information is used, you are
responsible for assessing the relevant hunting situation.
36