Publicidad
Idiomas disponibles
Idiomas disponibles
SlimPACK™ T12 USB QRG
Fuse
Replacement
Mounting
Mounting
Diagram
Control Panel
Description
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the
the mounting clamp is capable of supporting the weight of the
product.
For
our
www.chauvetlighting.com/cables-clamps-main.html.
Mounting Clamp
(such as the CLP-15N
from Chauvet)
Mounting Bracket
Safety Cable
(such as CH-05
from Chauvet)
Button
Function
<MENU>
Exits from the current menu or function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases the
<DOWN>
numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Chauvet
line
of
4
Safety
Notes. Make sure
mounting
clamps,
Bracket Adjustment Knob
EN
go
to
Publicidad
