Bosch MDCI Serie Manual De Instrucciones página 9

5.4. Tighten the nut
Care should be taken to not over tighten the brass nut. When pressure
testing, also use leak detection spray on mechanical joints. Please
determine the torque according to Table.3.
Tubing size
Φ6.4mm
Φ9.5mm
Φ12.7mm
Φ15.9mm
Φ19.1mm 97.2~118.6 N.m (990~1210 kgf.cm)
8. TO CHANGE THE POSITION OF THE CONDENSATE DISCHARGE TANK OUTLET
CLIMATE 5000 VRF
Fig.7
Torque
14.2~17.2 N.m (144~176 kgf.cm)
32.7~39.9 N.m (333~407 kgf.cm)
49.5~60.3 N.m (504~616 kgf.cm)
61.8~75.4 N.m (630~770 kgf.cm)
6. ADAPTER USAGE
7. THE UN-CONNECTED INLET PIPE NEEDS TO BE
Table.3
SEALED UP
Fig.10
Fig.8
change the small adapter to the big adapter
Fig.9
sealed up
ADAPTER USAGE | 3
6720862459 (16/04)