Denon Professional DN-508S Guia Del Usuario página 3

User Guide (English)
Introduction
The DN-508S is designed to meet your needs in multiple environments such as boardrooms, classrooms,
presentation facilities, and other installed applications. It is focused on delivering pure sound reproduction,
excellent for both speech and music.
The DN-508S delivers a wide-range frequency response by employing three extraordinary drivers and
unique crossover technology. It boasts a balanced low-mid frequency response along with a defined mid
and high frequency response. A dedicated mid-range driver provides exceptional speech intelligibility—ideal
for applications where vocal clarity is required.
Box Contents
DN-508S (1)
IEC power cable
User Guide
Safety & Warranty Manual
Non-slip pad
Support
For the latest information about this product (system requirements, compatibility information, etc.) and
product registration, visit denonpro.com.
Quick Setup
Connection Diagram
Items not listed under Introduction > Box Contents are sold separately.
The DN-508S loudspeakers feature balanced XLR and 1/4" connectors, as well as unbalanced RCA-type
analog inputs. Connect the outputs of your audio interface, loudspeaker controller, mixer, or other line-level
device to these inputs.
Tip: If your mixer, interface, or other audio source features both XLR/TRS and RCA-type outputs, use the
XLR or TRS connectors instead of the RCA connectors whenever possible. XLR and TRS cables incorporate
a "balanced" design that carries a signal over three conductors ("hot," "cold," and "ground") instead of two
conductors as found in RCA cables ("hot," and "ground"). This results in lower noise, higher rejection of
radio-frequency (RF) interference, and better overall fidelity. If XLR/TRS jacks are unavailable, use RCA-style
cables but try to keep the cables as short as possible.
3