Remote Control - Baton Klip Xtreme KSB-200 Manual De Instrucciones

Remote control

1
3
BT
5
AUX
6
TV
8
Buttons
Press this button to toggle between the standby
1. Standby button
and active modes on the device
Cancels the audio coming from the speaker. Press it
2. Mute button
again to unmute the speaker
- Press this button brie y to select the source device
3. BT button
connected via Bluetooth®
-
Press and hold to turn on the Bluetooth® function
4. 3D button Enables the surround sound e ect for a digitally
optimized audio
Press this button to select the source device
5. Aux in button
connected to the 3.5mm input jack
Press this button to select the source device
6. TV button
connceted to the RCA input jack
Press these buttons to increase or lower the audio
7.
level coming from the soundbar
2
4
3D
7
10
9
Description
Buttons
Takes you back to the previous track on your play list.
8.
This feature is only available in Bluetooth® mode
Press to start and pause media. This feature is only
9.
available in Bluetooth® mode
Takes you to the next track on your play list.
10.
This feature is only available in Bluetooth® mode
IV. Preliminary steps
The soundbar can be placed on a destktop or hang on the wall.
1.
2. If you decide to mount the soundbar on the wall, determine the location and
mark the holes on the surface. Drill holes must be placed 64 centimeters apart
from each other.
3. For gypsum or wooden walls, locate studs in the wall. You may use a stud
finder to determine the center of each stud.
Description
640mm