Armonía Pro Audio Suite; 1.SIgnal Routing And Dsp Architecture; 2.PUrposed Workflow - Powersoft audio X Serie Guía Rápida

Armonía Pro Audio Suite
armonía pro audio Suite is the default configuring inter-
face that allows system setting and customization of the X
Series amplifier platforms.
armonía can be installed on a pc running Windows (Xp
Sp3 and higher). Download armonía pro audio Suite from
the armonía forum:
http://www.powersoft-audio.com/en/armonia-forum
X Series amplifier platforms can connect to the pc run-
ning armonía through a Fast Ethernet connection. in order
to start remote operation, the device must be discovered
and imported into the armonía Workspace. click on the
Discover button in the remote entities windows, or select it
from the Model list and drag it into the armonía Workspace.
The callback button – located rightmost on the front
panel of the amplifier – allows you to highlight the presence
of the amplifier into the armonía Workspace.
once connected to armonía pro audio Suite, a double
click on the amplifier icon in the Workspace will open the
amplifier dashboard. Here it is possible to access and con-
figure all the features of the X Series platform.
FIG. 3: Armonía Pro Audio Suite.

9 : 1.Signal routing and DSP architecture

Signal processing on powersoft X Series amplifier plat-
forms accomplishes multiple functions that affect the audio
signal before power amplification. The main adjustments
include gain, polarity, delay, limiting and signal equalization;
some processing are related only to particular stages, such
as limiting and damping control that are implemented on the
output section only, or input priority assignment available in
the input section.
The processing architecture is composed of six sections:
f input source selection. The input section allows you f
to manage input gain and delay of analog and digital
sources, in order to compensate transmission latency
and levels. Furthermore, the X Series implements a
backup policy aimed to improve reliability against
24 | X Series
signal fault. By assigning a bus priority to the four dif-
ferent input sources – analog, aES3 and two Dante
streams – per channel, the system is able to automati-
cally switch to a reliable input connection in case of
any signal fault.
f Matrix. The innovative routing engine of X Series al-
f
lows any input to be routed to any output. The Matrix
implements a non-Boolean routing architecture allow-
ing free channel assignment and level adjustment.
f advanced processing. This allows you to optimize f
levels and shape the sound of the input signals. Gain
and polarity adjustment, asymmetric raised-cosine
full parametric filters, delay and mute are available on
each channel routed to the speaker section.
f Speaker equalization. Designed to manage the con- f
figuration presets for multi-way systems, it implements
Fir and iir full parametric filters.
f Speaker routing. once properly grouped, the output
f
channels are presented to the matrix as speakers – a
single row representing a speaker (actually group of
ways) – allowing a high grade of granularity in signal
processing.
f output processing. This allows fine-tuning of output f
signals, aiming to optimize power delivering and loud-
speaker performance. it provides gain and polarity
adjustment, iir and Fir full parametric filters, delay,
mute, limiting and damping control on each output
channel.

9 : 2.Purposed workflow

once the loudspeaker layout has been defined, we
suggest a bottom-up configuration procedure that starts
from the configuration of the transducers layout and raises
toward the input selection and the definition of the backup
policy.
Shortly, the main steps to follow are:
1. Load the loudspeaker presets or manually configure
the loudspeaker layout (grouping output channels,
crossovering, limiting, speaker processing, etc.).
2. Define the routing path and the levels of the signals
from the input channels to the active output channels
(matrix).
3. Select the signal source from the input connections
and define the backup policy (input source selection).
9