Sne Ak-A- Cup Tm Fe Ature; Setting Auto Brew Time; Care And Cleaning - Black+Decker CM1160 Manual De Instrucciones

SNEAK-A-CUP
Remove the carafe and brewing is paused. The carafe must be placed back on
the carafe plate in 30 seconds to prevent overflow. Brewing begins again.

SETTING AUTO BREW TIME

1. Press PROG button. The AUTO light (small dot in bottom left corner of digital
display) flashes several times. Digital clock displays 12:00.
2. Quickly press HOUR button then MIN button to select the time you would like
automatic brewing to begin (for example, 7:15 A.M. Make sure the P.M. light is
not on.)
3. Press AUTO button, holding it down until the AUTO light stops flashing.
The digital display changes to time of day.
4. To check preset auto time, press PROG button and preset auto time is displayed.
Press AUTO button to reactivate the timer. The AUTO light will turn on.
5. To cancel Auto Brew function, press the AUTO button. The AUTO light will turn off.

CARE AND CLEANING

This product contains no user serviceable parts. Refer service to qualified
service personnel.
CLEANING
Make sure your coffeemaker is unplugged and cool.
1. Remove brew basket. Discard used paper filter and coffee grounds.
2. Wash brew basket and carafe in dishwasher (top-rack) or by hand in hot,
soapy water.
3. Wipe outside of coffeemaker, control panel and carafe plate with a soft,
damp cloth.
Note: Do not use abrasive cleansers or scouring pads. Never immerse the
coffeemaker in water.
4. To clean the inside of the cover, open the cover and leave in the open position;
wipe with a damp cloth.
COFFEEMAKER PART
Housing
Carafe Plate
Power Cord
Carafe Lid
Brew Basket
Glass Carafe
FEATURE
TM
CLEANING INSTRUCTIONS
Wipe with a soft, damp cloth.
Wash by hand in warm soapy water, or in the
dishwasher (top rack only).
6