Presentation And General Aspects; Transport And Packaging; Identification Label - JMA MULTICODE SINGLE Manual De Instrucciones

MULTICODE SINGLE
KEY CUTTING MACHINE

1.- PRESENTATION AND GENERAL ASPECTS

1.1 GENERALITIES
The MULTICODE SINGLE duplicating machine has been designed taking into account current safety regulations in
force in the E.E.C.
Personal safety involved in the use of this type of machine is only attained with a well designed programme for per-
sonal safety, like the implementation and following of the recommended suggestions as well as compliance with the
safety regulations contemplated in this manual.
Although the installation of the machine is not difficult, we recommend carefully reading this manual before trying to
install, adjust or handle the machine.
The machine has left our factory ready for use and only needs calibrating operations for the tools to be used.

1.2 TRANSPORT AND PACKAGING

The machine is inside a package with the following dimensions:
Width = 610 mm, length = 510 mm, height = 520 mm.
Machine weight plus packaging = 19 + 5 = 24 Kg.
When unpacking the machine, carefully inspect it to see if it has been damaged during transport. If you discover any
anomaly, immediately notify the transporter and do not do anything with the machine until the transporter agent has
made the corresponding inspection.

1.3 IDENTIFICATION LABEL

The MULTICODE SINGLE duplicating machine has an identification label (Fig. 1), indicating the serial or registration
number of the machine, name and address of the manufacturer, EC marking and year of manufacturing.
FIG. 1
49