JMA MULTICODE SINGLE Manual De Instrucciones página 57

• Key limit.
After having chosen a side of the clamp, then you have to position the key lengthwise, to do that you have to take into
account the limit of the key. Depending on the model of the key, there are two types of limit:
1. Neck limit (C): This is the most common. The key is limited by means of a mechanical limit of the clamp. (Fig. 14)
2. Point limit (1, 2, and 3): The key is limited by means of the point limit supplied in the accessory box and this is
placed together with the key in the standard clamp slot.
Example of key positions in side 1 and limit 2 (Fig. 15)
FIG. 14
Point limit
FIG. 15
MULTICODE SINGLE
KEY CUTTING MACHINE
59