Multicode Single - JMA MULTICODE SINGLE Manual De Instrucciones

MULTICODE SINGLE

KEY CUTTING MACHINE
10.8 DIAGNOSTICS
On the adjustment screen we can also find the machine diagnostics area, here we can test the good operation of
motors.
Settings Diagnostics
After choosing diagnostics in the adjustment area, we will see the following screen.
1.- Continuous movement. This function moves the three axles.
2.- Advance axle X, axle, axle X advances one step.
3.- Reverse Motor X in checking. Send motor X to start.
4.- Advance axle Y, axle, axle Y advances one step.
5.- Reverse Motor Y in checking. Send motor Y to start.
6.- Advance axle Z.
7.- Reverse axle Z.
8.- Speed. Loads optimal speeds, in the case of resetting values.
9.- Reset to Factory settings. Resets to all factory settings. This option is protected with a password, and we
recommend only doing it with the help of the JMA technical service.
10.- Motor V.
11.- Motor H. Starts turning the horizontal axle (toothed keys).
88