Receiving Weather Or Traffic Information From Sat Radio; Changing The Display; Setting The Auxiliary Data Field Display - Alpine CDA-9857 Manual De Operación

Receiving Weather or Traffic information
from SAT Radio
1
Select the SAT Radio Channel for your local traffic/
weather information.
2
Press and hold /
SAT mode.
The received weather or traffic channel is stored.
3
Press and hold BAND for at least 2 seconds.
The stored Weather or Traffic channel will be recalled.
4
Press and hold BAND for at least 2 seconds.
Returns to normal mode.
• Stored channels can also be recalled by pressing and holding BAND
for at least 2 seconds, except when in XM or SIRIUS mode.
• Channel other than Weather or Traffic can also be stored and recalled.

Changing the Display

Text information, such as the channel name, artist name/feature, and
song/program title, is available with each XM or Sirius channel. The
unit can display this text information as explained below.
In XM or SIRIUS mode, press TITLE.
Each time you press this button, the display changes as shown below.
XM mode:
Category Name
Channel No./Channel Name
1
*
Auxiliary Data Field
Auxiliary Data Field
(Blank)
(Blank)
SIRIUS mode:
Category Name
Channel No./Channel Name
2
*
Composer Name
Song Name
(Blank)
(Blank)
1
* When ADF is turned OFF, this information is not displayed (see
"Setting the Auxiliary Data Field Display" on page 21).
Displayed in 1 line when text amount is small.
2
* When the Scroll setting (page 18) is set to "Auto", the display cannot
be switched by pressing TITLE. The display contents switch
alternately.
• When the "Scroll Setting" (page 18) is set to "Auto," the display
scrolls continuously.
When the Scroll Setting is set to "Manual," the display scrolls only
once after any function is performed (PRESET, BAND, SEARCH, etc.).
Press and hold TITLE for more than 2 seconds to scroll the display
manually.
"Channel No." and "Calendar/Clock" displays do not scroll.
• Depending on the model, the display may differ from the one shown above.
for at least 2 seconds in the
Artist Name
Song Name
Channel No./Channel Name
Calendar/Clock
Category Name
Channel No./Channel Name
2
*
Artist Name
Song Name
Channel No./Channel Name
Calendar/Clock
Category Name
Channel No./Channel Name

Setting the Auxiliary Data Field Display

The XM Auxiliary Data Field (ADF) display can be switched on or off.
There is no ADF function for the SIRIUS receiver.
1
Press MENU to select the SETUP mode, then press
MODE.
BBE BASS ENGINE
2
Press or to select the TUNER mode, then
press MODE.
GENERAL TUNER
3
Select "XM ADF" by pressing
press MODE.
4
Select ON/OFF by turning the Rotary encoder.
When setting to ON, Auxiliary Data Field is displayed by
pressing TITLE. (Refer to the "Changing the Display"
section page 21.)
5
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
SETUP RETURN (OFF) BBE
AUDIO DISPLAY DEMO
or , then
21
-EN