Replacing Components; Reminders For Replacing Components; Cleaning The Interior; Main Components - ALI NIW74TE Instrucciones Para Instalación, Uso Y Mantenimiento

12 Failure in mains
current
13 Power supply
connection error
14 Power supply
adaptor fault
15 Electrical circuit
protection

14 REPLACING COMPONENTS

REMINDERS FOR REPLACING COMPONENTS.

• Disconnect the appliance electric supply, if present, before
carrying out any operation.
• After replacing an electrical system component, check it is
correctly wired.
Replacing the hob inductor element
• Remove the control panel and front.
• Remove the component and disconnect it.
• Replace the faulty component.
Replacing the Wok inductor element
• Remove the control panel and front.
• Disconnect the inductor from the terminal board located on
the generator.
• Remove the inductor, lifting it downwards.
• Replace the faulty component.
Replacing the temperature regulator
• Remove the control panel.
• Replace the faulty component.
Replacing the generator
• Remove the control panel and front.
• Remove the generator and disconnect it.
• Replace the faulty component.
Replacing the glass ceramic hob
• In the event the glass ceramic hob is broken, contact our
company to have it replaced.

15 CLEANING THE INTERIOR

• Check the condition of the inside of the appliance.
• Remove any built-up dirt.
• Check and clean the fumes exhaust system.

16 MAIN COMPONENTS

• GLASS CERAMIC HOB
• Glass ceramic induction wok
• Indicator light
• Inductor elements
• Generator
• RFI filter
Failure while Check the power
measuring the supply connec-
mains current tion
Power supply Check the power
voltage too high supply connec-
or too low tion
Power supply Check the power
voltage too high supply connec-
or too low tion
Empty pan, de- Remove the pan,
fective sensor switch off
appliance
let the cooking
zone cool down
before switching
on again. Discon-
nect the genera-
tor and reconnect
it again after a
few minutes.
the
and
7