Radio - auna KR-400 Manual De Instrucciones

EN
28
switch the system into standby mode for convenience usage.

RADIO

Manual tuning
1. Plug in the provided DAB/FM tuner antenna to the antenna socket (25)
then switch on the unit by On/Standby button (14), then press Function
button (15) to select " FM " mode.
2. Tune to the required station by pressing the Tuning Up or Down button
(16/21).
3. Press the Volume knob (3) to the desired volume level.
Auto tuning
1. Set the unit to FM mode.
2. Press the Play/Scan button (17) once, unit will start to scan at tuning up
direct until radio station received. Press and hold the Play/Scan button
(17) for four second, the unit will scan to tuning down direction. If the
radio data system (RDS) broadcasting signal received, the unit will set
the actual time automatically.
3. Press the Volume knob (3) to the desired volume leve
Radio data system (RDS)
Radio data system (RDS)
This is the features to display the information which released from the
radio broadcast and will showed on LCD display step by step as below by
pressing the Info button(7) continuously.
Radio text program type signal strength --> date/time -> frequency ->
mono/stereo.
DAB radio
1. Set the unit to "DAB" mode by Function button (15).
2. Press the Play/Scan (17) button once, unit will start to full scan from
range 11b-12d one time within around 2 second. Then press Tune up/
down button (16/21) to select your desired DAB channel.
3. Press the Info button (7l) continuously to check the below info released
by DAB. Group name -> frequency -> transfer rate -> signal strength ->
date/time program type -> scrolling text
4. Press the Volume knob (3) to the desired volume level.
Preset stations
You can store up to total of 40 radio stations in the memory (20-FM/20-
DAB).
1. Set to FM/DAB mode
2. Turn to the desired radio station by " manual " or " auto " tuning method.