Victron energy Victron Global Remote Manual página 9

To change the logging period, the command "log" is required. Along with the parameter
"period", and a value indicating the desired period. To set the logging period to 1 hour, send
the following command:
log period 60
3.1.2 SMS limit
The number of SMS messages the modem sends is limited to a certain amount per day. The
default is set to 100 messages. This setting can be changed by an SMS command.
3.1.3 SMS command overview
Command Parameter
vebus
battery
info
gsm
gprs
gprs on
gprs off
gprs user
gprs pass
gprs apn
network
log
log period
alert
alert on
alert off
vgr
sms
sms limit
sms reset
Argument Description
Requests information about the VE.Bus
system.
Requests information about the battery.
Requests information about both the VE.Bus
system, and the battery.
Requests information about the GSM
network connection, including the signal
strength.
Requests the GPRS Internet connection
status.
Enables the GPRS Internet connection.
Disables the GPRS internet connection.
Sets the username for the GPRS Internet
<username>
connection.
Sets the password for the GPRS Internet
<password>
connection.
Sets the APN for the GPRS Internet
<APN>
connection.
Requests information about the GSM and
GPRS connections.
Requests the current logging period for web
mode.
Sets the logging period for web mode (in
<period>
minutes).
Requests the current alert configuration.
Enables alerts, and sets the alert number to
the number of the device that sent the
message.
Disables alerts.
Requests information about version of the
VGR.
Request the amount of SMS messages send
and the limit
<limit> Sets the maximum SMS messages per day
to value
resets the counter to zero to allow responses
again
5