Fastening The Fixing Rib To The Furniture Door (Freezer Compartment) - Gaggenau RY 492 Instrucciones De Instalación

Notes:
– Attach the adjusting rib with at least 10 screws on
the furniture door. One screw should be screwed in
under the threaded rod in each case.
– The adjusting rib has a various holes for different
furniture door design variations. Always carry out
screwing jobs on the most stable part of the furniture
door.
10. Fastening the fixing rib to
the furniture door
(freezer compartment)
Note:
The fixing ribs are pre-assembled for stainless steel
doors. In this case continue with the next installation step
("C / 11. Mounting the furniture door
(freezer compartment)").
1. Hang the furniture door on the threaded rod (a).
2. Adjust the furniture door using the threaded rod
(Torx screwdriver).
Re-examine the dimensions of the crack
continuously. To do this, use the assembly
gauge (b).
3. Transfer the position of the fastening screws on the
outer edge of the appliance door to the furniture
door and mark.
4. Remove furniture door.
5. On both lengths of the furniture door, draw a parallel
with the help of the positioning aid.
6. Lengthen the markings to the parallels using an
angle of contact.
7. Apply the fixing ribs (b) and mark out the holes.
8. Pre-drill the holes.
9. Screw on the fixing ribs (b).
21