How Do I Connect The Cardiomessenger - BIOTRONIK CardioMessenger Smart Manual Tecnico

6
First Steps
However, if the bedside table is made of metal, you
should not place the CardioMessenger directly on the
table. For example, place a stack of books to establish
a distance of approx. 5 cm between the two so that the
metal does not interfere with the device's data reception.
Please take the following also into consideration:
Do not place the CardioMessenger next to a television

set, microwave oven, or a similar source of electro-
magnetic disturbance.
You may hear noises typical of cellular phones if you
place the CardioMessenger too close to a radio alarm
or a television set, for example.
Do not expose the CardioMessenger to temperatures

exceeding 40°C (104°F). Do not put it in places where it
is subjected to direct sunlight and do not put it directly
under a halogen spotlight.
Do not expose the CardioMessenger to temperatures

below negative 5°C (23°F). The power supply brick
should not be exposed to temperatures lower than O°C
(32°F).
Protect the CardioMessenger against water and high

humidity.
Do not place it in the bathroom.

How Do I Connect the CardioMessenger?

Your CardioMessenger is already configured and is ready
for use. You can operate it immediately by inserting the
power plug (see Appendix, p. 30 for the type) into the wall
outlet.
Note: Also refer to the included quick reference guide.