Preparing The Nebuliser - Pari eFlow rapid Manual Del Usuario

• Connect the power adapter to the power
cord socket on the controller:
When the power adapter is plugged into a
socket, the controller is ready for use.

Preparing the nebuliser

CAUTION:
Check the parts of your nebuliser handset
before every application. Replace all bro-
ken, misshapen and heavily discoloured
parts. Damaged parts and incorrectly
assembled nebuliser handsets can impair
the function of the nebuliser and thus also
affect the treatment.
Info:
The medication reservoir and the
aerosol chamber are already
preassembled.
• Open the aerosol chamber (5a):
®
eFlow rapid - 01/17
• Insert the aerosol head (3).
It must snap noticeably into place.
NOTE:
Do not touch the membrane (metal part in
the middle of the aerosol head), it can be
damaged very easily.
• Insert the inspiratory valve (6).
When doing so, check that the two valve
flaps are seated correctly. They must lie
perfectly flush.
5a
3
6
en
35