Pari eFlow rapid Manual Del Usuario página 51

Fault
Little or no aerosol is escaping.
The medication cap cannot be
removed from the medication reservoir
after the inhalation treatment.
If the malfunction persists, contact your local service partner.
®
eFlow rapid - 01/17
Possible cause/Remedy
The ambient temperature should be at least
10 °C.
• Wait until the device has stabilised at the
lowest ambient temperature.
The negative pressure in the aerosol cham-
ber is too great.
• Open the aerosol chamber and gently pull
the aerosol head so that air is able to flow
in.
The cap can now be removed easily.
en
47